1. fabric@lists.hyperledger.org
  2. Messages
   Date   
CORE_PEER_ADDRESS vs CORE_PEER_LISTENADDRESS

Siddharth Jain
 

from the docs w.r.t. CORE_PEER_ADDRESS it is said that this represents the endpoint to other peers in the same organization.

and CORE_PEER_LISTENADDRESS is The Address at local network interface this Peer will listen on.

So why would anyone want to set these two differently? If my friend's actual phone number is 123-456-7890 (the CORE_PEER_LISTENADDRESS) and the number I have in my phone book is 234-567-8901 (the CORE_PEER_ADDRESS) then there is bound to be a problem when I try to call my friend. So why does Fabric open up this possibility?
Re: #fabric #fabric-kubernetes #hyperledger-fabric #fabric #fabric-kubernetes #hyperledger-fabric

Nicholas Leonardi
 

You can start by having a look at this generic network.

Em segunda-feira, 27 de janeiro de 2020 10:34:01 BRT, <jquesada@...> escreveu:


Hi, can someone point me to more information on the resources we could need for a Hyperledger Fabric production deployment? The idea is to start with 3 organizations using on premise hardware. We are looking to use 9 peers total, and 5 orderer nodes. We have used docker containers on one machine so far for our development environment, but we are looking into using Helm with Kubernetes. We are expecting a low volume of transactions so far, maybe 5-10 tps to start, but we want to be ready to scale in the future. Any insight on the hardware we may need for a production environment will be really appreciated. Thank you.

#fabric #fabric-kubernetes #hyperledger-fabric #fabric #fabric-kubernetes #hyperledger-fabric

jquesada@...
 

Hi, can someone point me to more information on the resources we could need for a Hyperledger Fabric production deployment? The idea is to start with 3 organizations using on premise hardware. We are looking to use 9 peers total, and 5 orderer nodes. We have used docker containers on one machine so far for our development environment, but we are looking into using Helm with Kubernetes. We are expecting a low volume of transactions so far, maybe 5-10 tps to start, but we want to be ready to scale in the future. Any insight on the hardware we may need for a production environment will be really appreciated. Thank you.
Re: Is HLF a DLT or a blockchain?

Nye Liu <nye@...>
 


On Fri, Jan 24, 2020, 7:45 PM Trevor Lee Oakley <trevor@...> wrote:
 
I see conflicting references to this. The docs refer to a DLT and also a blockchain. In 4.5.1 of the docs it states it is a blockchain but in other parts it states it is a DLT. I have seen countless references to both. 
 
Is there any official statement from the Linux Foundation about this?
 
 
Trevor

Re: Is HLF a DLT or a blockchain?

greg m
 

‘Altar of Proof of Work’ seems to be the biggest sticking point for all the definitions and it echoes “bitcoin maximalism”. In my mind, Linux Foundation, have made so much investment into the blockchain phenomenon, that for the member companies there is no going back even if they end up not calling it DLT, but something else – a sign of changing DT environments.

 

My 2 cents and not meant to start a flame.

 

Thank you, greg

 

Sent from Mail for Windows 10

 

From: Brian Behlendorf
Sent: Saturday, January 25, 2020 4:22 AM
To: fabric@...
Subject: Re: [Hyperledger Fabric] Is HLF a DLT or a blockchain?

 

Let's not get too hung up on terminology in such a charged environment. Don't take this as an "official statement".

Yes, Fabric's underlying data structure involves a string of blocks, chained together, cryptographically signed and linked, and similar in spirit (if not exact approach) to Satoshi's use of the term in the Bitcoin white paper. Some would say you can't even whisper Satoshi's name let alone use the term "blockchain" without bowing down at the alter of Proof of Work, but I think most feel that ship has sailed.

Yes, it would also not in inaccurate to describe the resulting system you build with Fabric as a "distributed ledger", distributed amongst the peers on the system (more precisely, on the same channel), with referential integrity and transactional characteristics worthy of the accounting term "ledger".

Now it might be a good idea to make sure Fabric docs use the terms consistently, just for clarity's sake.  But one can use both terms around Fabric without conflict.

Brian

 

On 1/24/20 7:45 PM, Trevor Lee Oakley wrote:

 

I see conflicting references to this. The docs refer to a DLT and also a blockchain. In 4.5.1 of the docs it states it is a blockchain but in other parts it states it is a DLT. I have seen countless references to both. 

 

Is there any official statement from the Linux Foundation about this?

 

 

Trevor

 

-- 
Brian Behlendorf
Executive Director, Hyperledger
bbehlendorf@...
Twitter: @brianbehlendorf

 
Re: Is HLF a DLT or a blockchain?

Brian Behlendorf <bbehlendorf@...>
 

Let's not get too hung up on terminology in such a charged environment. Don't take this as an "official statement".

Yes, Fabric's underlying data structure involves a string of blocks, chained together, cryptographically signed and linked, and similar in spirit (if not exact approach) to Satoshi's use of the term in the Bitcoin white paper. Some would say you can't even whisper Satoshi's name let alone use the term "blockchain" without bowing down at the alter of Proof of Work, but I think most feel that ship has sailed.

Yes, it would also not in inaccurate to describe the resulting system you build with Fabric as a "distributed ledger", distributed amongst the peers on the system (more precisely, on the same channel), with referential integrity and transactional characteristics worthy of the accounting term "ledger".

Now it might be a good idea to make sure Fabric docs use the terms consistently, just for clarity's sake.  But one can use both terms around Fabric without conflict.

Brian


On 1/24/20 7:45 PM, Trevor Lee Oakley wrote:
 
I see conflicting references to this. The docs refer to a DLT and also a blockchain. In 4.5.1 of the docs it states it is a blockchain but in other parts it states it is a DLT. I have seen countless references to both. 
 
Is there any official statement from the Linux Foundation about this?
 
 
Trevor
 


-- 
Brian Behlendorf
Executive Director, Hyperledger
bbehlendorf@...
Twitter: @brianbehlendorf
Is HLF a DLT or a blockchain?

Trevor Lee Oakley <trevor@...>
 

 
I see conflicting references to this. The docs refer to a DLT and also a blockchain. In 4.5.1 of the docs it states it is a blockchain but in other parts it states it is a DLT. I have seen countless references to both. 
 
Is there any official statement from the Linux Foundation about this?
 
 
Trevor
Re: [i18n] Status report on translation of Fabric docs

Pam Andrejko
 

Yang,
Thanks for posting this update. The transition of Fabric from Gerrit to GitHub certainly facilitates this process making it easier to add the translations. There's alot of  good translation work that has already been done by the team so we are well positioned now to use that with the process you are proposing. 

I agree that creating the new Fabric-i18n repo with folders for each language is straightforward and should be easy to manage.

Thank you for putting together this proposal and we look forward to sharing more on one of the Contributors Calls.

~Pam
Re: what is the difference between system channel and application channel?

Yacov
 

the system channel is a channel that is available only on ordering service nodes, and it is simply used to synchronize application channel creation.

All transactions on the system channel are either configuration transactions, or transactions that create new channels.



From:        "Siddharth Jain" <siddjain@...>
To:        "fabric@..." <fabric@...>
Date:        01/24/2020 07:31 PM
Subject:        [EXTERNAL] [Hyperledger Fabric] what is the difference between system channel and application channel?
Sent by:        fabric@...



Hello

Is there any document explaining what is the difference between system channel and application channel in Fabric?

Sid
what is the difference between system channel and application channel?

Siddharth Jain
 

Hello

Is there any document explaining what is the difference between system channel and application channel in Fabric?

Sid
Hyperledger Fabric Documentation Workgroup call - Western hemisphere - Fri, 01/24/2020 #cal-notice

fabric@lists.hyperledger.org Calendar <noreply@...>
 

Hyperledger Fabric Documentation Workgroup call - Western hemisphere

When:
Friday, 24 January 2020
4:00pm to 5:00pm
(GMT+00:00) Europe/London

Where:
https://zoom.us/j/6223336701

Organizer:
a_o-dowd@... +441962816761

Description:
Documentation workgroup call.
Agenda, minutes and recordings :https://wiki.hyperledger.org/display/fabric/Documentation+Working+Group

Re: Chaincode Upgrade Docker Container Environment

Kimheng SOK
 

Thank you

On Fri, Jan 24, 2020 at 10:36 PM Brett T Logan <Brett.T.Logan@...> wrote:
In core.yaml you can specify your own chaincode runtime image for golang, Java or Node. So you can extend the image to include your tools, publish the image to a Docker registry and then use that as the runtime in your core.yaml:
 
 
 
Brett Logan
Software Engineer, IBM Blockchain
Phone: 1-984-242-6890
 
 
 
----- Original message -----
From: "Kimheng SOK" <sok.kimheng@...>
Sent by: fabric@...
To: hyperledger-fabric@...
Cc:
Subject: [EXTERNAL] [Hyperledger Fabric] Chaincode Upgrade Docker Container Environment
Date: Fri, Jan 24, 2020 10:17 AM
 
Dear all,
 
I have one question, each time we upgrade our chaincode a new docker container is created. 
But the problem is it doesn't inherit all the environment of the old version docker, from example if we install some program in the chaincode docker container, when we upgrade chaincode we need to install those program again in the new chaincode container.
 
Is there a solution, so that we don't need to re-install the program again and again when we upgrade our chaincode?
 
Bests, 
 
Re: Chaincode Upgrade Docker Container Environment

Brett T Logan <brett.t.logan@...>
 

In core.yaml you can specify your own chaincode runtime image for golang, Java or Node. So you can extend the image to include your tools, publish the image to a Docker registry and then use that as the runtime in your core.yaml:
 
 
 
Brett Logan
Software Engineer, IBM Blockchain
Phone: 1-984-242-6890
 
 
 

----- Original message -----
From: "Kimheng SOK" <sok.kimheng@...>
Sent by: fabric@...
To: hyperledger-fabric@...
Cc:
Subject: [EXTERNAL] [Hyperledger Fabric] Chaincode Upgrade Docker Container Environment
Date: Fri, Jan 24, 2020 10:17 AM
 
Dear all,
 
I have one question, each time we upgrade our chaincode a new docker container is created. 
But the problem is it doesn't inherit all the environment of the old version docker, from example if we install some program in the chaincode docker container, when we upgrade chaincode we need to install those program again in the new chaincode container.
 
Is there a solution, so that we don't need to re-install the program again and again when we upgrade our chaincode?
 
Bests, 
 
Chaincode Upgrade Docker Container Environment

Kimheng SOK
 

Dear all,

I have one question, each time we upgrade our chaincode a new docker container is created. 
But the problem is it doesn't inherit all the environment of the old version docker, from example if we install some program in the chaincode docker container, when we upgrade chaincode we need to install those program again in the new chaincode container.

Is there a solution, so that we don't need to re-install the program again and again when we upgrade our chaincode?

Bests, 
Re: Error while trying to launch the chaincode as a standalone process

Yacov
 

Clients need to connect to the peer with port 7051
Chaincodes connect to the peer with port 7052

So when you install the chaincode, use port 7051



From:        "Marina Wanis" <marinamaged1996@...>
To:        Yacov Manevich <YACOVM@...>
Cc:        "hyperledger-fabric@..." <hyperledger-fabric@...>
Date:        01/24/2020 03:31 PM
Subject:        [EXTERNAL] Re: [Hyperledger Fabric] Error while trying to launch the chaincode as a standalone process
Sent by:        fabric@...



Hi Yacov,
 
I’m not getting an error when I try to launch the chaincode anymore but now when I install the chaincode I get the following error. I made sure that the port is 7052. By setting up the environment variable : export CORE_PEER_ADDRESS="localhost:7052"
 
The error that I get when I install the chaincode is:-
Error: Error endorsing chaincode: rpc error: code = Unimplemented desc = unknown
service protos.Endorser
 
Thanks,
Marina
 
Sent from Mailfor Windows 10
 

From: Yacov Manevich
Sent: Friday, January 24, 2020 4:13 PM
To: Marina Wanis
Cc: hyperledger-fabric@...
Subject: Re: [Hyperledger Fabric] Error while trying to launch the chaincode as a standalone process
 
This means that the chaincode tries to access the peer over a port that is not correct.
By default, the peer listens to port 7052

Maybe the chaincode tries to access via a different port?



From:        "Marina Wanis" <marinamaged1996@...>
To:        "hyperledger-fabric@..." <hyperledger-fabric@...>
Date:        01/24/2020 08:53 AM
Subject:        [EXTERNAL] [Hyperledger Fabric] Error while trying to launch the chaincode as a standalone process
Sent by:        fabric@...




Hi,

I was trying to lunch the chaincode as a standalone process but I got the following error.
Can someone please explain me the cause of the following error?

2020-01-24 06:48:15.778 UTC [shim] chatWithPeer -> ERRO 005 Received error from server, ending chaincode stream: rpc error: code = Unimplemented desc = unknown service protos.ChaincodeSupport
receive failed
github.com/hyperledger/fabric/core/chaincode/shim.chatWithPeer
       /vagrant/gocc/src/github.com/hyperledger/fabric/core/chaincode/shim/chaincode.go:362
github.com/hyperledger/fabric/core/chaincode/shim.Start
       /vagrant/gocc/src/github.com/hyperledger/fabric/core/chaincode/shim/chaincode.go:156
main.main
       /vagrant/gocc/src/chaincode_example02/chaincode_example02.go:198
runtime.main
       /usr/local/go/src/runtime/proc.go:200
runtime.goexit
       /usr/local/go/src/runtime/asm_amd64.s:1337
Error starting Simple chaincode: receive failed: rpc error: code = Unimplemented desc = unknown service protos.ChaincodeSupport

Thanks,
Marina



 
Re: Error while trying to launch the chaincode as a standalone process

Marina Wanis <marinamaged1996@...>
 

Hi Yacov,

 

I’m not getting an error when I try to launch the chaincode anymore but now when I install the chaincode I get the following error. I made sure that the port is 7052. By setting up the environment variable : export CORE_PEER_ADDRESS="localhost:7052"

 

The error that I get when I install the chaincode is:-

Error: Error endorsing chaincode: rpc error: code = Unimplemented desc = unknown

service protos.Endorser

 

Thanks,

Marina

 

Sent from Mail for Windows 10

 

From: Yacov Manevich
Sent: Friday, January 24, 2020 4:13 PM
To: Marina Wanis
Cc: hyperledger-fabric@...
Subject: Re: [Hyperledger Fabric] Error while trying to launch the chaincode as a standalone process

 

This means that the chaincode tries to access the peer over a port that is not correct.
By default, the peer listens to port 7052

Maybe the chaincode tries to access via a different port?



From:        "Marina Wanis" <marinamaged1996@...>
To:        "hyperledger-fabric@..." <hyperledger-fabric@...>
Date:        01/24/2020 08:53 AM
Subject:        [EXTERNAL] [Hyperledger Fabric] Error while trying to launch the chaincode as a standalone process
Sent by:        fabric@...




Hi,
 
I was trying to lunch the chaincode as a standalone process but I got the following error.
Can someone please explain me the cause of the following error?
 
2020-01-24 06:48:15.778 UTC [shim] chatWithPeer -> ERRO 005 Received error from server, ending chaincode stream: rpc error: code = Unimplemented desc = unknown service protos.ChaincodeSupport
receive failed
github.com/hyperledger/fabric/core/chaincode/shim.chatWithPeer
        /vagrant/gocc/src/github.com/hyperledger/fabric/core/chaincode/shim/chaincode.go:362
github.com/hyperledger/fabric/core/chaincode/shim.Start
        /vagrant/gocc/src/github.com/hyperledger/fabric/core/chaincode/shim/chaincode.go:156
main.main
        /vagrant/gocc/src/chaincode_example02/chaincode_example02.go:198
runtime.main
        /usr/local/go/src/runtime/proc.go:200
runtime.goexit
        /usr/local/go/src/runtime/asm_amd64.s:1337
Error starting Simple chaincode: receive failed: rpc error: code = Unimplemented desc = unknown service protos.ChaincodeSupport
 
Thanks,
Marina



 
Re: Error while trying to launch the chaincode as a standalone process

Yacov
 

This means that the chaincode tries to access the peer over a port that is not correct.
By default, the peer listens to port 7052

Maybe the chaincode tries to access via a different port?



From:        "Marina Wanis" <marinamaged1996@...>
To:        "hyperledger-fabric@..." <hyperledger-fabric@...>
Date:        01/24/2020 08:53 AM
Subject:        [EXTERNAL] [Hyperledger Fabric] Error while trying to launch the chaincode as a standalone process
Sent by:        fabric@...



Hi,
 
I was trying to lunch the chaincode as a standalone process but I got the following error.
Can someone please explain me the cause of the following error?
 
2020-01-24 06:48:15.778 UTC [shim] chatWithPeer -> ERRO 005 Received error from server, ending chaincode stream: rpc error: code = Unimplemented desc = unknown service protos.ChaincodeSupport
receive failed
github.com/hyperledger/fabric/core/chaincode/shim.chatWithPeer
        /vagrant/gocc/src/github.com/hyperledger/fabric/core/chaincode/shim/chaincode.go:362
github.com/hyperledger/fabric/core/chaincode/shim.Start
        /vagrant/gocc/src/github.com/hyperledger/fabric/core/chaincode/shim/chaincode.go:156
main.main
        /vagrant/gocc/src/chaincode_example02/chaincode_example02.go:198
runtime.main
        /usr/local/go/src/runtime/proc.go:200
runtime.goexit
        /usr/local/go/src/runtime/asm_amd64.s:1337
Error starting Simple chaincode: receive failed: rpc error: code = Unimplemented desc = unknown service protos.ChaincodeSupport
 
Thanks,
Marina




Privacy vs Decentralisation #hyperledger-fabric #raft #fabric-questions #fabric-orderer

yashukla47@...
 

I have a question.

Can orderers read all the transactions passing through them even from the channels of which their organization is not a part of

If yes, then is there any solution to implement complete decentralization (by having one orderer per organization) + Privacy among the members of the channel. except for using private data.
Error while trying to launch the chaincode as a standalone process

Marina Wanis <marinamaged1996@...>
 

Hi,

 

I was trying to lunch the chaincode as a standalone process but I got the following error.

Can someone please explain me the cause of the following error?

 

2020-01-24 06:48:15.778 UTC [shim] chatWithPeer -> ERRO 005 Received error from server, ending chaincode stream: rpc error: code = Unimplemented desc = unknown service protos.ChaincodeSupport

receive failed

github.com/hyperledger/fabric/core/chaincode/shim.chatWithPeer

        /vagrant/gocc/src/github.com/hyperledger/fabric/core/chaincode/shim/chaincode.go:362

github.com/hyperledger/fabric/core/chaincode/shim.Start

        /vagrant/gocc/src/github.com/hyperledger/fabric/core/chaincode/shim/chaincode.go:156

main.main

        /vagrant/gocc/src/chaincode_example02/chaincode_example02.go:198

runtime.main

        /usr/local/go/src/runtime/proc.go:200

runtime.goexit

        /usr/local/go/src/runtime/asm_amd64.s:1337

Error starting Simple chaincode: receive failed: rpc error: code = Unimplemented desc = unknown service protos.ChaincodeSupport

 

Thanks,

Marina

Hyperledger Fabric Documentation Workgroup call - Eastern hemisphere - Fri, 01/24/2020 #cal-notice

fabric@lists.hyperledger.org Calendar <noreply@...>
 

Hyperledger Fabric Documentation Workgroup call - Eastern hemisphere

When:
Friday, 24 January 2020
6:00am to 7:00am
(GMT+00:00) Europe/London

Where:
https://zoom.us/j/6223336701

Organizer:
a_o-dowd@... +441962816761

Description:
Documentation workgroup call.
Agenda, minutes and recordings: https://wiki.hyperledger.org/display/fabric/Documentation+Working+Group

3981 - 4000 of 11576